Wednesday, August 29, 2012

Successful test of battery pack

Today I made a series of successful tests with our custom-made battery packs.

First of all, the battery pack was used to prove that the required temperature of the resistance wires can be reached.

Then a very simple soldering test was made with a single sample. The results were encouraging with very good values and an expected timeline. You can see the test performed in the somewhat blurry video below.

Lastly a capacity test was made with three parallel samples to make sure the battery pack could support the whole soldering process. Could it? Well, see for yourself ..



Electronics out, Rock on!

No comments:

Post a Comment